Carbon Monoxide (CO) Gas Sensor RS-CO-V10-2-2000P-2 0-10V

Carbon Monoxide (CO) Gas Sensor RS-CO-V10-2-2000P-2 0-10V The RS-CO-V10-2-2000P-2 is a fixed carbon monoxide gas sensor designed for continuous ambient monitoring, providing an output in the 0-10 V voltage range proportional to CO concentration. Its enclosure is built for durability in indoor and semi-industrial settings, protecting the internal sensing element from dust, humidity, and incidental mechanical impacts. The sensor is intended for permanent or semi-permanent installation in locations where reliable CO measurement is critical for safety or environmental control. Carbon monoxide gas diffuses into the sensor’s measurement chamber via a permeable barrier or diffusion port, reaching an internal electrochemical or semiconductor sensing module. There it reacts with electrode surfaces or sensing layers, causing a change in electrical potential that is translated by embedded electronics into a precise 0-10 V analog voltage. Temperature and humidity compensation circuits correct for environment variations, helping maintain consistent accuracy under varying ambient conditions. Over extended operation, the RS-CO-V10-2-2000P-2 is engineered for stability and minimal drift, reducing the need for frequent recalibration. It interfaces directly with controllers, data acquisition systems, or alarm systems that accept 0-10 V input. When CO levels cross predefined thresholds, the sensor’s signal can prompt ventilation systems, alarms, or safety protocols. Its design supports continuous, dependable performance, making it suitable for places where CO accumulation must be actively managed. Features: Linear 0-10 V analog output correlated to CO concentration. Broad CO measurement range (e.g. up to ~2000 ppm). Integrated compensation for temperature and humidity variations. Low long-term drift and good signal stability. Fast response to changes in CO levels. Rugged, protected enclosure for reliable field use. Easy interfacing with control systems, PLCs, or data loggers. Specifications: Parameter Value / Range Measuring gas: Carbon monoxide (CO) Output signal: 0 – 10 V analog Measuring range: 0 – 2000 ppm (typical) Accuracy: ± a few % of reading or ± some ppm Response time: Seconds to tens of seconds Operating temperature: –20 °C to 50 °C (approximate) Humidity range: 0 – 95 % RH non-condensing Power supply (input): ~10 – 30 V DC (or suitable range) Drift: Low long-term drift Enclosure protection / IP: Dust / moisture resistant (IP rating) Dimensions / Weight: Per manufacturer mechanical data Applications: Indoor air quality safety. Industrial CO monitoring. Garage / parking area ventilation control. HVAC / building safety systems. Combustion equipment safety monitoring. Tunnel or underground environment monitoring. Package Contents: 1x Carbon Monoxide (CO) Gas Sensor RS-CO-V10-2-2000P-2 0-10V